V3 Plus Setup Guide
1. Turn on your TV and set the input to the HDMI port to which you will connect your vSeebox.
2. Connect your HDMI cable to the correct input on the TV and then to the vSeebox.
3. Plug in the power cord. The vSeebox will automatically power on.
4. Install two AAA batteries into the remote:
• The back cover does not slide open. Instead, pry the cover up from the open slot using your fingernail.
• When reinstalling the cover, line it up properly and push down on all sides and edges until it snaps securely into place.
5. Pair the remote:
• The TV will display the vSeebox boot-up logo and prompt you to link the remote.
• Press and hold the OK button and Volume Down at the same time.
• The TV will indicate once the remote has been successfully connected.
6. Note:
• The remote uses Bluetooth, so it does not require a line of sight.
• You can place the vSeebox inside a cabinet or mount it behind the TV.
7. Select your language.
8. Adjust the screen ratio, then press the OK button.
9. Select your time zone.
10. Agree to the Disclaimer Notice.
11. Connect to the Internet:
• If you have an Ethernet cable connected to your modem or router, you can hardwire the vSeebox for a more stable internet connection.
• Alternatively, you can use a Wi-Fi connection.
• You do not need a VPN service for these devices.
• Select your router and enter your Wi-Fi password.
12. Firmware Update:
• If prompted to upgrade to a new firmware version, select Yes.
• This process may take a few minutes. It may appear to be stuck at 99% but wait for it to complete.
13. Resetting Application and Database:
• After the firmware update, the TV screen will say “Resetting application and database.”
14. Main Menu:
• When complete, the main menu will appear.
• Wait 30–60 seconds for the main applications to start downloading automatically.
• Let them fully download before proceeding.
15. Setup Complete:
• Setup is complete when the main screen displays all the applications.
Additional Tips: Always ensure internet speed is above 25 Mbps. Clear the cache weekly.
Restart your modem monthly—power off your vSeeBox when not in use to extend its lifespan.