V6 Max Remote Programming

1. Put the Remote in TV Learning Mode

On the Bluetooth + IR model, the TV learning mode is usually activated like this:

1.    Hold the TV  button you would like to program, one at a time and program each button individually.
2.    Keep holding until the LED starts flashing slowly.
                Flashing = ready to learn IR commands.

​

​

​

2. Teach the Remote Each TV Function

You’ll need your original TV remote for this part.

For each button you want to program:

1.    On the V5 Pro remote, press the button you want to assign (Power, Vol+, Vol–, Mute, Source, etc.).

2.    The LED will change to a steady light.

3.    Point your TV remote directly at the front of the V5 Pro remote (1–2 inches apart).

4.    Press the matching button on your TV remote.

5.    The LED should blink twice to confirm the command was learned.

Repeat for each button you want to copy.

 

 

​

3. Save and Exit Learning Mode

•    Press the TV Power button again to exit.

•    The LED stops flashing.

•    Test the buttons on your TV.

 

 

​

​

Tips for Best Results

•    Keep the remotes aligned IR to IR (front to front).

•    Avoid bright sunlight or LED lamps during programming.

•    If a button doesn’t learn, repeat the step slowly.

•    Some TVs require a longer press when teaching the Source/Input button.